Hi Luc. Below are two options for your consideration. I basically did like your email requested. I started with IND001 on the left. I then blended FALL001 into the scene. I covered the bridge in the original version of IND001 in order to prevent a bridge to nowhere being in your backdrop. I tried blending these so that the lumber yard looks like it goes behind the trees a little bit instead of an abrupt stop.
On the far left I have done the same thing except in reverse. This time IND001 is reversed, and I blended the lumber stacks in such a way as to suggest the lumber yard continues in front of the treeline. I did reverse FALL001 as requested. Judging by your buildings in the photos you sent me, the trees should be tall enough. If you want to let me know how tall your buildings are I can confirm that.
Finally, in order to give continuity to the sky I replaced the skies in the versions of IND001 with sky from FALL001. This allows the scene to flow better.
The overall size of the backdrop as posted is 16" tall by 19' 8" long as specified in your email. There are two options. Option one has a slightly lower tree line and incorporates the entirety of IND001 on both ends of the backdrop. Option two has slightly taller trees and cuts off IND001 at different points on each end to help reduce the mirror image effect a little bit. This backdrop will print in two sections. My suggestion is to make one section 13 feet long and the other the balance of the distance being 6' 8" long. This would put any seems tucked away in the corner.
You may click on the images to view them full size. Let me know what you think.
|
 |
| Option 1 |
|
|
 |
| Option 2 |
|
|
|